Provide stable, high-quality PoE power products & services
-
-
The transmission distance of the PoE is up to 100 meters, which can save costs and make wiring more flexible.
Beyond Patchwork Solutions, Engineered as the Foundation for Reliable Outdoor Networks.
10Gbps PoE, traditional PoE upgrade
he 10Gbps PoE is Technical upgrade of traditional Gigabit Ethernet while maintaining cost-effectiveness.
High-Strength Complex Environment Rated Network Power Supply for Industrial Applications
Industrial PoE for High-Temperature & Harsh Environments | Reliable PoE Networking
-
Services
Focus, quality, and innovation
-
Resources
PoE power supplies
-
Contact Us
PoE (Power over Ethernet) network power supply products.
Gigabit PoE Surge Protector, 120W Pass-Through, 60Vdc Max, Imax 10kA, 20kV Surge Protection, Wide-Temp
P/N:
PT-PR01G
Product
Product Highlights
- Up to 120W and 60Vdc pass-through
- 20kV surge protection with up to 10kA discharge current
- 1ns response time for rapid surge suppression
- 10/100/1000Mbps data transmission
- Bidirectional PoE port with low signal attenuation
- Compatible with IEEE 802.3af/at/bt and non-standard devices
- Reliable operation from -40°C to 85°C
- Compact housing with wall-mounted
Gigabit PoE Surge Protector, 120W Pass-Through, 60Vdc Max, Imax 10kA, 20kV Surge Protection, Wide-Temp
P/N: PT-PR01G
The protector installed inline between the PSE and PD, it is compatible with IEEE 802.3af/at/bt and PoE++ equipment and provides up to 20kV surge protection. Its compact aluminum alloy enclosure simplifies installation in industrial scenarios.
Specifications
Hardware Specifications
| Ports | 2 x 10/100/1000Mbps PoE | Operating Voltage | 60Vdc Max |
| Maximum Operating Current | 1A for 2 pairs, 2A for 4 pairs | Maximum Operating Power | 120W |
| Nominal Discharge Current | 5kA | Max Discharge Current | 10kA (8/20us, 1.25kA per line) |
| Response Time | 1ns | PoE Surge Protection | Common mode : 20 kV (10/700us) Differential mode : 1.5 kV (10/700us) |
| Operating Environment | -40 to 85°C 20%–80% RH, non-condensing |
Storage Environment | -40 to 85°C 10%–90% RH, non-condensing |
| Dimensions (HxWxD) | 103.0mm × 28.0mm × 30.0mm | Enclosure | IP40 |
| Material | Aluminum alloy | Installation | Wall-Mounted |
Certification
Connectivity Solutions
Features
Surge Protection
20kV
Data Rate
1Gbps
Comparison
PT-PR01G
|
PT-PR01G-DIN
|
PT-PR01G-10
|
PT-PR01G-OT
|
|
|---|---|---|---|---|
| Ports | 2 x 100/1000Mbps PoE Ports | 2 x 100/1000Mbps PoE Ports | 2 x 1/2.5/5/10G PoE Port | 2 x 100/1000Mbps PoE Ports |
| Support PoE Standard | IEEE 802.3af/at/bt, non-standard PoE | IEEE 802.3af/at/bt, non-standard PoE | IEEE 802.3af/at/bt, non-standard PoE | IEEE 802.3af/at/bt, non-standard PoE |
| Maximum Operating Voltage | 60Vdc | 60Vdc | 60Vdc | 60Vdc |
| Maximum Power Handling | 120W | 120W | 120W | 60W |
| In (8/20us) | 5kA | 5kA | 5kA | |
| Imax (8/20us) | 10kA, 1.25kA per line | 10kA, 1.25kA per line | 10kA, 1.25kA per line | 20kA, 2.5kA per line |
| Response Time | 1ns | 1ns | 5ns | 5ns |
| Surge Protection (10/700us) | Common mode : 20 kV Differential mode : 1.5 kV |
Common mode : 20 kV Differential mode : 1.5 kV |
Common mode : 20 kV Differential mode : 1.5 kV |
Common mode : 20 kV Differential mode : 6 kV |
| IP Rating | IP40 | IP40 | IP40 | IP67 |
| Operating Temperature | -40 to 85°C | -40 to 85°C | -40 to 85°C | -40 to 65°C |
| Enclosure | Aluminum Alloy | Zinc Alloy | Aluminum Alloy | Aluminum Alloy |
| Installation | Wall-mount | DIN-Rail mount | Wall-mount | Wall or Pole Mounting |
Videos
Q&A
Q: I'm planning to set this up right next to my outdoor security camera. The aluminum alloy shell looks tough—can I just bolt it straight onto the outside wall as is, or do I need to cover it up with something?
We wouldn’t recommend leaving it completely exposed to the outdoors. In fact, the manual explicitly states it’s for indoor use only. If you absolutely have to use it outside, you'll need to tuck it inside a waterproof enclosure or box.
Q: We use passive AP. Can this protector handle the juice?
You're completely good to go! The PT-PR01G fully supports non-standard PoE devices. Specifically, the circuitry can handle a maximum input voltage of up to 60Vdc , and it allows a maximum current of 2A when utilizing 4-pair PoE.
Q: I see RJ45 ports on both ends, but the labels just say 'PoE Input or PoE Output'. Which way is 'in' and which way is 'out'? If I accidentally plug it in backward, will it fry my camera or my injector?
Don't worry! Plugging it in backward won't burn out your gear, but to get the absolute best lightning protection, you'll want to follow the setup diagrams. While both ports are identical and have minimal signal loss, a good rule of thumb is to treat the side with the grounding screw terminal as the side closest to your protected device (like your PoE camera or switch).
Online Inquiry
Dear customer, please leave your contact information, and we will provide you with satisfactory service as soon as possible
Contact
Rm. 238 Huaxia Tech Building, Zhongguancun Software Park, Haidian District, 100193 Beijing
©2026 PROCET