SFP PoE Injector

Home >> Products >> SFP PoE Injector

PT-PSE106GBR-S SFP 802.3bt PoE Injector

PT-PSE106GBR-S is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp.    

Designed for powered 60W PoE Powered Devices (PDs), such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet terminals. It complies with IEEE802.3bt and backward compatible with IEEE802.3af/at standard. It supports 1000Mbps of data speed. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non-PoE device.

Enclosed in an IP40 plastic case, designed for indoor use. It operates with an input voltage of 100-240Vac 1.5A. The effective distance limitation of 100 meters over Cat5e/Cat6 cables.

  • Specifications
  • Support & Dowload
  • Gallery
  • Test Results
  • Standing Stock


Key Featuresbt standard 60W indoor PoE injector
Part NumberPT-PSE106GBR-S
Ports  conditionSFP Port*1, LAN Port*1, AC Input Port*1, PoE Output Port*1
PoE output60W
Data rates1000 Mbps
Power input100-240Vac 1.5A
Power output55Vdc 1.1A
Regulatory ComplianceIEEE 802.3bt
RoHS Compliance
WEEE Compliance
Working EnvironmentOperating Temperature: 0℃ to 40℃
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -20℃ to 70℃
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
AC Surge ProtectionAC Surge Protection
Line-Earth 1.2/50us (8/20us): 2KV
Line-Line 1.2/50us (8/20us): 1KV
PoE Surge Protection
Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Mechanical CharacteristicsSize: 178.71mm X 85mm X 41mm
Weight: 500g(1.10lb)
Safety  ApprovalsCE, FCC