DIN PoE Injector

Home >> Products >> DIN PoE Injector

PT-PSE105G-T-24 Passive DIN PoE Injector

PT-PSE105G-T-24 is a single port DIN midspan Injector with 2 Pair PoE up to 30 watts of power 24Vdc 1250mA @DC input&Output 24Vdc 1050mA @802.3at input with 6Kv surge protection.Designed for the IEEE802.3af powered 30W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates.


It will directly power PD without detecting.The effective distance is 100 meters over Cat5e/Cat6 cables.


Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case.It works with a wide input voltage of 44-60Vdc OR 802.3at make it possible for solar application and operates under -40℃ to +65℃,  For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables.    

  • Specifications
  • Support & Dowload
  • Gallery
  • Test Results
  • Standing Stock


Key FeaturesPassive DIN Industrial PoE injector
Part NumberPT-PSE105G-T-24
Ports  conditionSFP Port*1, PoE Port*4
PoE output25.2W
Data rates10/100/1000 Mbps
Power input44-60Vdc OR 802.3at
Power outputOutput 24Vdc 1250mA @DC input
Output 24Vdc 1050mA @802.3at input
Regulatory CompliancePassive
RoHS Compliance
WEEE Compliance
Working EnvironmentOperating Temperature: -40℃ to 65℃
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40℃ to 85℃
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge ProtectionProtected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV
Mechanical CharacteristicsSize: 144.5mmX 95mmX35.4mm
Weight: 400g(0.88lb)