PT-PR01G-DIN is a single-port industrial PoE surge protector designed for exterior complex backhaul and networking applications with an IP 40 rated Zinc alloy shell. It supports 8 lines network signals and provides surge protection for PoE wires. 10KV surge protection and four Level protection for SPD technology. Peak Surge Current up to 10KA. It supports10/100/1000Mbps of data rates. Ideal for 110W(max) PoE wires and well protects your devices against surge damage.
PT-PR01G-DIN operates from -40℃ to +85℃ and works with voltage of 60Vdc (max). PoE In port should always be connected to device which you want it to be protected.
It is connected to network over Cat5e/Cat6 cables with RJ45 connector conveniently and tightly.This model equipped standard DIN rail mounting bracket, which can easily jam into the guide rail. The DIN rail as a ground wire to transmit the current to the earth.
|Key Features||DIN rail mounted|
|DIN rail is the ground wire|
|Operating Voltage||60Vdc Max|
|IEEE802.3i 10Base-T Ethernet|
|IEEE802.3u 100Base-Tx Fast Ethernet|
|IEEE802.3ab 1000Base-T Gigabit Ethernet|
|Max Operating DC Current||1A for 2 pairs, 2A for 4 pairs|
|Max Operating Power||120W|
|Operating Temp.||-40℃ to 85℃|
|Operating Environment||Operating Humidity: 20% to 80%, non-condensation|
|Operating Altitude||Up to 5000 meters|
|EMC||EN 55032:2015/A11:2020 EN 55035:2017/A11:2020|
|Input&Ouput||Interface：PoE * 2|
|Mechanical Characteristics||Case: Zinc alloy case|
|Dimensions： 77.2mm X 45mm X 19mm|
|IEC60068-2-32 (Free Fall)|
|PoE Surge Protection||Common Mode Protection Level(10/700us):10KV|
|Differential Mode Protection Level(10/700us): 1.5KV|