PT-PR02G is a dual-port industrial PoE surge protector designed for exterior complex backhaul and networking applications with an IP 40 rated Zinc alloy shell. It supports 8 lines network signals and provides surge protection for PoE wires. 10KV surge protection and four Level protection for SPD technology. Peak Surge Current up to 10KA. It supports10/100/1000Mbps of data rates. Ideal for 120W(max) PoE wires and well protect your devices against surge damage.
PT-PR02G operates from -40℃ to +85℃ and works with a voltage of 60Vdc (max). It is connected to the network over Cat5e/Cat6 cables with an RJ45 connector conveniently and tightly.
This model is equipped wall-mounted or standard DIN rail mounting bracket, which can easily jam into the guide rail. The DIN rail is a ground wire to transmit the current to the earth.
|Key Features||DIN rail mounted|
|DIN rail is the ground wire|
|Ports condition||2 input ports; 2 output ports|
|Regulatory Compliance||IEEE802.3bt or PoE ++|
|Pass-Through Data Rates||10/100/1000 Mbps|
|Output||Maximum Operating DC Current: Maximum 110W|
|Input||Operating Voltage: 5-60Vdc|
|Working Environment||Operating Temperature: -40℃ to 85℃|
|Operating Humidity: 20% to 80%, non-condensation|
|Storage Temperature: -40℃ to 85℃|
|Storage Humidity: 10% to 90%, non-condensation|
|Operating Altitude: up to 2000meters|
|PoE Surge Protection||Max Discharge Current: 10KA(8/20us,1.25KA per line)|
|Protected Line: 1,2,3,4,5,6,7,8|
|Common Mode Protection Level(10/700us): 10KV|
|Differential Mode Protection Level(10/700us): 1.5KV|
|Insertion Loss @10MHz/100MHz：-1db|
|Return Loss @10MHz/100MHz: -20db|