PoE Surge Protector

Home >> Products >> PoE Surge Protector

PT-PR01B-10G-OT Outdoor 10G 100W Surge Protector

PT-PR01B-10G-OT is a single-port PoE surge protector designed for exterior complex backhaul and networking applications with an IP 67 rated Aluminum alloy shell. It supports 8 lines network signals and provides surge protection for PoE wires. 10KV surge protection and four Level protection for SPD technology. Peak Surge Current up to 20KA.It supports not only 10/100/1000Mbps of data rates, but also 2.5/5/10GbE NBase-T.Ideal for 100W(max) PoE wires and well protects your devices against surge damage.

PT-PR01B-10G-OT operates from -40℃ to +65℃ and works with voltage of 44-57Vdc. PoE In port should always be connected to device which you want it to be protected.

Both RJ45 ports connect to network over Cat5e/Cat6 cables which is very conveniently and tightly. It can be easily installed with 2 mounting holes.

  • Specifications
  • Support & Dowload
  • Gallery
  • Test Results
  • Standing Stock


Key Features10GbE data rates
Provide 10KV surge protection and 4 Level protection for 4 PoE wires simultaneously
Peak Surge Current up to 20KA per PoE wire

Wide temperature at -40 to 65 even up to 85 can be   outdoor use by covered with waterproof case

No local power is needed.

Part NumberPT-PR01B-10G-OT
Ports conditionPoE In Port*1, PoE Out Port*1
Regulatory Compliance


RoHS Compliance

WEEE Compliance
Pass Through Data Rates10/100/1000 Mbps & 2.5/5/10GbE
Input & OutputPin Assignment and Polarity:
4/5 (+), 7/8 (–) and 3/6(+),1/2(-)
Operating Voltage :44-57Vdc, (Max 60Vdc)
Maximum Operating DC Current :1A for 2 pairs,
                                                       2A for 4 pairs
                                                       Maximum 100W
Working   EnvironmentOperating Temperature: -40 to 65
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40
to 85
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge   ProtectionMax Discharge Current: 20KA(8/20us,2.5KA per line)
Protected Line: 1,2,3,4,5,6,7,8
Common Mode Protection Level(10/700us): 10KV
Differential Mode Protection Level(10/700us): 6KV
Clamping Voltage(Line to GND): 300V
Clamping Voltage(Line to Line): 10V
Insertion Loss @10MHz/100MHz -1db
Return Loss @10MHz/100MHz: -20db
Response Time 5ns
Mechanical CharacteristicsCase: Aluminium alloy
Color: White
Mounting: Wall-mounted
IP Rated: IP67
Connectors: Shielded RJ-45
Size: 209mm X 53mm X 37.5mm
Weight: 380g
Warranty2 years