PT-PR01G-DIN is a single-port PoE surge protector, which has 2 RJ45 ports. Either port can be PoE in or PoE out. It supports 8 lines network signals and provides surge protection for PoE wires. The PoE surge protector can bear 10KA Peak Surge Current. 10KV(10/700us) common mode surge voltage and 1.5KV(10/700us) differential mode surge voltage. It supports not only 10/100/1000Mbps of data rates, but also 2.5/5/10GbE NBase-T. It is ideal to well protect your device against surge damage.
It is designed for indoor use with a Zinc-alloy shell, which works with 60Vdc Max voltage and operates from -40℃ to 85℃. It is connected to network over Cat5e/Cat6 cables with RJ45 connector conveniently and tightly.
This model has equipped a standard DIN rail mounting bracket, which can easily jam into the guide rail. The Ethernet lightning arrestor must be properly grounded to work. Because it only used on a DIN Rail and the DIN rail as a ground wire to transmit current to the earth.
|Key Features||10G Din Rail PoE Surge Protector 120W 10KV 10KA Zinc alloy case|
|Ports condition||RJ45 PoE Port*2|
|Operating Power||PoE 120W(Max)|
|Working Environment||Operating Temperature: -40℃ to 85℃|
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40℃ to 85℃
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
|PoE Surge Protection||Max Discharge Current: 10KA(8/20us,1.25KA per line)|
Protected Line: 1,2,3,4,5,6,7,8
Common Mode Protection Level(10/700us): 10KV
Differential Mode Protection Level(10/700us): 1.5KV
Insertion Loss @10MHz/100MHz：-1db
Return Loss @10MHz/100MHz: -20db
|Mechanical Characteristics||Size: 77.2X 45X 19mm|