PT-PR01G-DIN is a single-port industrial PoE surge protector designed for exterior complex backhaul and networking applications with an IP 40 rated Zinc alloy shell. It supports 8 lines network signals and provides surge protection for PoE wires. 10KV surge protection and four Level protection for SPD technology. Peak Surge Current up to 10KA. It supports10/100/1000Mbps of data rates. Ideal for 110W(max) PoE wires and well protects your devices against surge damage.
PT-PR01G-DIN operates from -40℃ to +85℃ and works with voltage of 60Vdc (max). PoE In port should always be connected to device which you want it to be protected.
It is connected to network over Cat5e/Cat6 cables with RJ45 connector conveniently and tightly.
This model equipped standard DIN rail mounting bracket, which can easily jam into the guide rail. The DIN rail as a ground wire to transmit the current to the earth.
|Key Features||DIN rail mounted|
DIN rail is the ground wire
|Ports condition||PoE Port*2|
|Regulatory Compliance||IEEE802.3bt or PoE ++|
|Pass Through Data Rates||10/100/1000 Mbps|
|Output||Maximum Operating DC Current :1A for 2 pairs |
2A for 4 pairs
|Input||Operating Voltage :60Vdc (Max.)|
|Working Environment||Operating Temperature: -40℃ to 65℃|
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40℃ to 85℃
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 2000meters
|PoE Surge Protection||Max Discharge Current: 10KA(8/20us,1.25KA per line)|
Protected Line: 1,2,3,4,5,6,7,8
Common Mode Protection Level(10/700us): 10KV
Differential Mode Protection Level(10/700us): 1.5KV
Insertion Loss @10MHz/100MHz：-1db
Return Loss @10MHz/100MHz: -20db