60W PoE Injector

Home >> Products >> 60W PoE Injector

PT-PSE105GB-AC-10 Industrial 60W 10G PoE Injector

PT-PSE105GB-AC-10 is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55Vdc, at 1.75Amp with 6Kv surge protection.    

Designed for the PoE++ powered 95W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10GbE of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non-PoE device.    

Enclosed in an IP40 high-impact metal case with DIN-Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 100-240Vac or 44-57Vdc and operates under -40℃ to +65℃,  For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables.    

  • Specifications
  • Support & Dowload
  • Gallery
  • Test Results
  • Standing Stock


Key FeaturesPoE++ 95W DIN-Rail Industrial PoE injector
Part NumberPT-PSE105GB-AC-10
Ports  conditionLAN *1, DC Input*1, PoE Output *1
PoE output95W
Data rates10 GbE
Power inputAC input 100-240Vac
or DC input 44-57Vdc
Power output55Vdc/1.75A @AC input  95W
44-57Vdc@DC input
Regulatory CompliancePoE++
RoHS Compliance
WEEE Compliance
Working EnvironmentOperating Temperature: -40℃ to 65℃
Operating Humidity: 20% to 80%, non-condensation
Storage Temperature: -40℃ to 85℃
Storage Humidity: 10% to 90%, non-condensation
Operating Altitude: up to 5000meters
PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8
Common mode surge protection(10/700us): 6KV
Differential mode surge protection (10/700us): 1.5KV 
Mechanical CharacteristicsSize: 144.5 X 104.2 X 60mm
Weight: 819g(l.8lb)